NLandKeys will try their best to produce cases that look just as nice as keyboards that cost 5x as much. From a typical viewing distance during normal use the keyboard should be free of significant bumps, scratches and chips. This does not include slight imperfections that are only viewable in certain angles and lighting conditions.

Any imperfection (scratch, gloss, discoloration, mark, bump, differences in texture) under 1.5mm on the exterior of the case will not be considered for replacement.

The top and bottom cases are separate halves and are machined separately. Due to difference in tolerance there may be slight horizontal displacement / difference in form of one half relative to the other. The spray coating adds thickness, so depending on the spread the apparent seam between the two cases may vary very slightly in certain parts.

NLandKeys will try their best to make the interior of the case as nice as the outside, but in some cases there may exist various marks inside the keyboard case, which would not be visible once fully assembled. This may include, but not limited to uneven spraying, accumulation of powder, scratches and marks left from the hanging points.

PVD finishes on Stainless Steel and Brass weights cover a large area, which is prone to slight imperfections. There may be fine particles embedded on the surface. There may be distortions of reflection on certain parts.

All hot-swap sockets, no matter the PCB or manufacturer, are prone to breaking off when switches are installed without bracing the hot-swap sockets from the back. NLandKeys will not replace PCBs that are damaged due to user error. Please inspect your PCB as soon as you receive your keyboard kit for any damage caused during transit or production. If you find anything wrong please contact your vendor within 24 hours.

The renders provided on this page are for reference only. A photograph of all color sample swatches have been provided on this page. NLandKeys will try their best to match the final product match as close to the render as possible, but due to the nature of production the colors may vary slightly.